Celatect F Undercoat 氟樹酯配套用中間漆 F
PRODUCT DESCRIPTION               An undercoat for fluoro resin coating based on epoxy resin and polyamide hardener.
& INTENDED USES         
產品簡介                          聚氨酯固化的環氧樹脂涂料，氟樹脂面漆的配套用中間漆。



FEATURES
產品特性
                                  z Excellent resistance to sea water splashing
                                  耐海水飛濺
                                  z Tough and high abrasion resisting
                                  漆膜強韌、耐磨損性極好
                                  z Good adhesion to epoxy primers and fluoro resin top coat
                                  對氟樹脂面漆和環氧底漆有極好的的附著力
                                  z Excellent resistance to heavy oils and mild chemical
                                  極好的耐重油性和弱化學品性
                                  z High performance
                                  具有優良的物化性能
BASIC DATA
基本數據
Color(s)                          Colors
顏色                              各色。
Mixing ratio                      Two-pack (Base/hardener=5/1)
混合比率                          雙組分：主劑/固化劑=5/1
Solids content                    60%
重量固體份
Film thickness                    Dry :30 microns/coat     Wet : 70microns/coat
涂裝膜厚                          干膜: 30m/道           濕膜: 70m/道
preading rate                     Theoretical:0.090kg/m 2/30 microns
涂覆率                            理論值 : 0.090 千克/平方米/30m
                                  Practical: Various depending on surface conditions, environment, applications, etc.
                                  實際值 : 與表面處理, 外界環境, 施工方法等多種因素有關。
STORAGE
儲存
Shelf temperature                 0℃-40℃
儲存溫度
shelf life                        1 year

儲存期限                          1 year

Flash point Greater than          21℃

閃點                              21℃以上


APPLICATION DATA
施工數據

Pot life
混合使用期
Temperature (℃)         溫度       5   20  30
Pot life (hrs)           混合使用期 12  8   6
                         期

Application methods
施工方法                 Airless spray and air spray
                         無氣噴涂及空氣噴涂
                         Airless spray    無空氣噴涂   Recommended 推薦

                         Nozzle tip       噴嘴尺寸     0.021-0.027

                         Fluid pressure   出口壓力     2

                         Thinning         稀釋比率    100-150kg/cm
                         0-10% by wet    （重量比）

Thinner                  Epomarine thinner 10
稀釋劑                   船用環氧稀料 10#
Application temperature -10℃-40℃

施工溫度

Drying time &
Overcoating interval
干燥時間&涂裝間隔

                                  Temperature (℃) 溫度 5


                                  Dry to touch (hrs) 指觸干燥 3




                                  Dry hard (hrs) 半硬干燥 24


                                  *Min. interval (days) 最小涂裝間隔 24


                                  Max. interval          最大涂裝間隔 -

PAINTING SYSTEM
涂裝配套
Subsequent coat                   polyurethane primer and epoxy primer ect.
適用下涂                          聚氨酯底漆、環氧底漆等


SURFACE PREPARATION
表面處理                         Remove salt and other water-soluble contaminants by fresh water hosing.
                                 用清水沖去鹽份及其它水溶性污物。
                                 z Degrease according to SSPC-SP1 solvent cleaning.
                                 依照 SSPC-SP1 溶劑清洗標準除去油脂。
                                 z Remove rust, mill-scale and other loose material by abrasive blasting to ISO Sa2.5
                                 (SSPC-SP10) or better.
                                 用噴砂方式除去鐵銹、氧化皮等達到 ISO Sa2.5 (SSPC-SP10)或更好。
                                 z Remove dust and dirt by high pressure air before paint application
                                 用高壓空氣吹掃除去灰塵等污物。
                                 z Be sure that the surface is clean and dry prior to application.
                                 施工前確認表面清潔干燥。


安全措施                         A health and safety data sheet for product is available upon request. Minimum
                                 precautions to be taken in dealing with all paints are:
                                 任何油漆施工中均應保證提供以下措施:
                                 z Avoid skin and eye contact.
                                 避免接觸皮膚和眼睛。
                                 z If paint comes into contact with the skin , wash with warm water and/or a suitable
                                 cleanser. If paint comes into contact with the eyes, flush with copious amount of
                                 water and seek immediate medical attention.
                                 如果油漆接觸到皮膚，應用溫水以及（或者）適當的清洗劑清洗。如果油漆
                                 接觸到眼睛，應用大量水沖洗并立即就醫。
                                 z Ensure good ventilation.
                                 保證良好的通風。
                                 z Observe all health and safety data on the container.
                                 現場遵守一切健康安全規定。

DISCLAIME                        The information given on this sheet is to the best of our knowledge and
提請注意                         accurate at the time of printing. Since conditions of use are beyond the manufacture's
                                 control, information contained herein is without warranty, implied or otherwise, and
                                 the suitability of the material for the use contemplated is the sole responsibility of the
                                 buyer. The information contained on this data sheet is subject to modification at any
                                 time due to our policy of modification and product development.
                                 本說明書所提供信息均為目前我方所掌握最全面正確的資料,鑒于產品使用條件
                                 非我方所能控制，此中信息不含擔保，即僅在選取產品上對買方負責。由于我
                                 公司產品及生產工藝的不斷發展，此中所有信息均以我方確認為主。